LINED PIPE SPOOL - WELDED FIXED / ROTATING - JACKETED

01) Size Range 25 mm to 300 mm
02) Max Available Length 3000 mm
03) End Connection One Flange Fixed and Other Flange Loose, Both Flange Fix
04) Pipe Specification Carbon Steel Seamless Pipes confirming to ASTM A-106 Gr. Sch . 40
05) Flange & Collar Made From Plates confirming to IS 2062
06) Flange Dimensions DIN PN10/16, BS 10, ASME 150 / 300, Mixed
07) Lining PTFE Liner Extruded from Virgin PTFE Granules
08) Lining Options PP, HDPE
09) Lining Thickness Minimum 3.5 mm / 6.0 overall (±1.0 Lining Tolerance)
10) Lining Spark Test 20 KVDC
11) Extras (On Request) Earthing Studs / Lugs, Vent Extensions , Grounding Provision


LINED - CONCENTRIC / ECCENTRIC REDUCER - REDUCING FLANGE - BLIND FLANGE

01) Size Range 25 mm to 300 mm
02) End Connection Both sides Fixed flanges - Roting
03) Material a. Up to 150 mm Reducers and Up to 300 mm Reducing - S.G. Iron (IS 1865 : 1991 Gr. 400 / 15)
b. For Reducers from 200 mm to 300 mm - Formed adn Fabrication from C.S. Seamless Pipes Confirming to ASTM A - 106 Gr.B, Sch.40
04) Flange made from Plates Confirming to IS 2062
05) Flange Dimentions DIN PN 10 / 16, BS 10, ASME 150 / 300, Mixed
06) Lining Moulded FEP / PFA
07) Lining options PTFE, FEP, PFA, PVDF, ECTEF, PP, HDPE, ETFE.
08) Lining Thickness Minimum 1.0 mm / 6.0 overall (±1.0 Lining Tolerance)
09) Lining Spark Test 20 KVDC
10) Extras (On Request) Earthing Studs / Lugs, Vent Extensions, Grounding Provision

LINED 45° AND 90° DEGREE ELBOWS

01) Size Range 25 mm to 300 mm
02) Standard Degrees 45° and 90° (Long Radius / Other Angles on Request )
03) End Connection Both Sides Fixed Flanges - Rotating - Fixed on / Off Centers
04) Material Formed and Fabricated from Carbon Steel Seamless Pipes Confirming to ASTM A - 106 Gr. B, Sch. 40
05) Flanges Made from Plates Confirming to IS 2062
06) Flange Dimentions DIN PN10 / 16, BS10, ASME 150 / 300, Mixed
07) Lining PTFE Liner Exruded from Virgin PTFE Granuales
08) Lining options PTFE, FEP, PFA, PVDF, ECTFE, PP, HDPE, ETFE
09) Lining Thickness minimum 3.5 mm / 6.0 overall (±1.0 Lining Tolerance)
10) Lining Spark Test 20 KVDC
11) Extras (On Request) Earthing Stude / Lugs, Vent Extentions, Grounding Provision


EQUAL - UNEQUAL or REDUCING - LATERAL - INSTRUMENT - TEES - EQUAL CROSS

01) Size Range 25 mm to 300 mm
02) End Connection Both Sides fixed flanges - Rotating - Fixed On /Off Centres
03) Material a. Up to 150 mm - S.G.Iron (IS 1865:1991 Gr. 400 / 15)
b. 200 mm to 300 mm - Formed and Fabricated from Carbon Steel Seamless Pipes Confirming to ASTM A106 Gr. B, Sch. 40
04) Flange Made from Plates Confirming to IS 2062
05) Flange Dimensions DIN PN 10 / 16, BS 10 , ASME 150 / 300 , Mixed
06) Lining Moulded FEP / PFA
07) Lining options PTFE, FEP, PVDF, ECTFE, PP, HDPE, ETFE
08) Lining Thickness minimum 1.0 mm to 0.6 overall (± 1.0 Lining Tolerance)
09) Lining Spark Test 20 KVDC
10) Extras (On Request) Earthing Studs / Lugs, vent Extensions, Non Standard Sizes


PTFE BELLOWS

01) Pressure Range 150 PSIG to 190 PSIG (Depending on size and style)
02) Sizes

1" through 12"
03) Bellow Material

White PTFE, flared over flange surface
04) Flanges

Coated carbon steel or 316 stainless steel. ANSI 150# drilling. Tapped holes
05) Limit Rods Three limits rods of plated carbon steel or 316 stainless steel. PTFE grommets
06) Reinforcing Rings

316 stainless steel
07) Styles Available Two convolute flexible coupling or three convolute expansion joint

Share This: